Files
homelab/hosts/mercury/configuration.nix
T
darmanandClaude Opus 5.5 e849827ebb feat(mercury): trim closure 2.9G → 1.6G; deploy with --use-substitutes
mercury drops the sd-image installer profile (rescue tools, ZFS), linux-firmware,
docs, installer tools and the nixpkgs registry pin — every deploy rewrites the
changed closure onto the SD card.

deploy switch/boot/test now passes --use-substitutes on all hosts: targets pull
cache hits themselves (compressed) instead of the laptop pushing uncompressed
NARs over ssh.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-14 23:32:37 +02:00

68 lines
3.3 KiB
Nix

{ config, pkgs, lib, ... }:
# mercury — Raspberry Pi 3B+ (aarch64). Network DNS + DHCP (+ adblock).
# Boots from an SD image (see flake: nixosConfigurations.mercury), so there is
# no disko / hardware-configuration here — the sd-image module provides them.
{
imports = [
../../common.nix # shared base: user / ssh / nix / firewall
./secrets.nix # sops-nix: darman password (age key on boot part.)
../../services/network/unbound.nix # local recursive resolver (127.0.0.1:5335)
../../services/network/pihole.nix # DNS adblock + DHCP (declarative static leases)
../../services/vpn/tailscale.nix # tailnet node (headscale on neptun)
../../services/monitoring/node-exporter.nix
];
networking.hostName = "mercury";
# ---- Static networking ----
# A DNS/DHCP server needs a fixed address (values from `ip -brief a` / `ip
# route` on the running Pi; eth0 is its NIC).
networking.useDHCP = false;
networking.usePredictableInterfaceNames = false; # keep it named eth0
networking.interfaces.eth0.ipv4.addresses = [
{ address = "10.0.0.10"; prefixLength = 24; } # the Pi's current IP
];
# Stable IPv6 (FRITZ!Box ULA prefix) so mercury is a fixed IPv6 DNS target —
# SLAAC still handles the GUA + default route. Announce this address as the
# FRITZ!Box's DNSv6 server so IPv6 clients resolve .sol via pihole.
networking.interfaces.eth0.ipv6.addresses = [
{ address = "fd18:df17:9078:0::10"; prefixLength = 64; }
];
networking.defaultGateway = { address = "10.0.0.1"; interface = "eth0"; };
networking.nameservers = [ "1.1.1.1" "9.9.9.9" ];
# Never take the tailnet's DNS here: headscale points every node at pihole,
# which runs on this host, so mercury would resolve through itself — keep
# the public resolvers above for its own lookups.
services.tailscale.extraUpFlags = [ "--accept-dns=false" ];
# ---- pihole web admin password (from sops) ----
# The pihole container reads FTLCONF_* env vars. Render an env file from the
# sops secret and feed it to the container — password stays out of repo/store.
sops.secrets.pihole_webpassword = { };
sops.templates."pihole.env".content =
"FTLCONF_webserver_api_password=${config.sops.placeholder.pihole_webpassword}";
virtualisation.oci-containers.containers.pihole.environmentFiles =
[ config.sops.templates."pihole.env".path ];
# ---- Closure trim ----
# Every deploy rewrites the changed closure onto the SD card, so drop what the
# sd-image module pulls in for installer use (2.9G → 1.6G).
# base.nix = installer rescue tools + ZFS/xfs/btrfs support.
disabledModules = [ "profiles/base.nix" ];
environment.systemPackages = [ pkgs.tcpdump ]; # kept from base.nix: DHCP debugging
# ~850M of linux-firmware; eth0 needs none and the Pi's GPU firmware lives on
# the FIRMWARE partition. Re-enable if WiFi/Bluetooth is ever used.
hardware.enableRedistributableFirmware = lib.mkForce false;
documentation.enable = false;
system.disableInstallerTools = true; # nixos-rebuild runs on the laptop, not here
# Pins nixpkgs' ~200M source into the closure; `nix shell nixpkgs#…` here
# falls back to the global registry instead.
nixpkgs.flake.setFlakeRegistry = false;
nixpkgs.flake.setNixPath = false;
# Do not modify after first flash.
system.stateVersion = "26.05";
}