mercury drops the sd-image installer profile (rescue tools, ZFS), linux-firmware, docs, installer tools and the nixpkgs registry pin — every deploy rewrites the changed closure onto the SD card. deploy switch/boot/test now passes --use-substitutes on all hosts: targets pull cache hits themselves (compressed) instead of the laptop pushing uncompressed NARs over ssh. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
68 lines
3.3 KiB
Nix
68 lines
3.3 KiB
Nix
{ config, pkgs, lib, ... }:
|
|
|
|
# mercury — Raspberry Pi 3B+ (aarch64). Network DNS + DHCP (+ adblock).
|
|
# Boots from an SD image (see flake: nixosConfigurations.mercury), so there is
|
|
# no disko / hardware-configuration here — the sd-image module provides them.
|
|
{
|
|
imports = [
|
|
../../common.nix # shared base: user / ssh / nix / firewall
|
|
./secrets.nix # sops-nix: darman password (age key on boot part.)
|
|
../../services/network/unbound.nix # local recursive resolver (127.0.0.1:5335)
|
|
../../services/network/pihole.nix # DNS adblock + DHCP (declarative static leases)
|
|
../../services/vpn/tailscale.nix # tailnet node (headscale on neptun)
|
|
../../services/monitoring/node-exporter.nix
|
|
];
|
|
|
|
networking.hostName = "mercury";
|
|
|
|
# ---- Static networking ----
|
|
# A DNS/DHCP server needs a fixed address (values from `ip -brief a` / `ip
|
|
# route` on the running Pi; eth0 is its NIC).
|
|
networking.useDHCP = false;
|
|
networking.usePredictableInterfaceNames = false; # keep it named eth0
|
|
networking.interfaces.eth0.ipv4.addresses = [
|
|
{ address = "10.0.0.10"; prefixLength = 24; } # the Pi's current IP
|
|
];
|
|
# Stable IPv6 (FRITZ!Box ULA prefix) so mercury is a fixed IPv6 DNS target —
|
|
# SLAAC still handles the GUA + default route. Announce this address as the
|
|
# FRITZ!Box's DNSv6 server so IPv6 clients resolve .sol via pihole.
|
|
networking.interfaces.eth0.ipv6.addresses = [
|
|
{ address = "fd18:df17:9078:0::10"; prefixLength = 64; }
|
|
];
|
|
networking.defaultGateway = { address = "10.0.0.1"; interface = "eth0"; };
|
|
networking.nameservers = [ "1.1.1.1" "9.9.9.9" ];
|
|
|
|
# Never take the tailnet's DNS here: headscale points every node at pihole,
|
|
# which runs on this host, so mercury would resolve through itself — keep
|
|
# the public resolvers above for its own lookups.
|
|
services.tailscale.extraUpFlags = [ "--accept-dns=false" ];
|
|
|
|
# ---- pihole web admin password (from sops) ----
|
|
# The pihole container reads FTLCONF_* env vars. Render an env file from the
|
|
# sops secret and feed it to the container — password stays out of repo/store.
|
|
sops.secrets.pihole_webpassword = { };
|
|
sops.templates."pihole.env".content =
|
|
"FTLCONF_webserver_api_password=${config.sops.placeholder.pihole_webpassword}";
|
|
virtualisation.oci-containers.containers.pihole.environmentFiles =
|
|
[ config.sops.templates."pihole.env".path ];
|
|
|
|
# ---- Closure trim ----
|
|
# Every deploy rewrites the changed closure onto the SD card, so drop what the
|
|
# sd-image module pulls in for installer use (2.9G → 1.6G).
|
|
# base.nix = installer rescue tools + ZFS/xfs/btrfs support.
|
|
disabledModules = [ "profiles/base.nix" ];
|
|
environment.systemPackages = [ pkgs.tcpdump ]; # kept from base.nix: DHCP debugging
|
|
# ~850M of linux-firmware; eth0 needs none and the Pi's GPU firmware lives on
|
|
# the FIRMWARE partition. Re-enable if WiFi/Bluetooth is ever used.
|
|
hardware.enableRedistributableFirmware = lib.mkForce false;
|
|
documentation.enable = false;
|
|
system.disableInstallerTools = true; # nixos-rebuild runs on the laptop, not here
|
|
# Pins nixpkgs' ~200M source into the closure; `nix shell nixpkgs#…` here
|
|
# falls back to the global registry instead.
|
|
nixpkgs.flake.setFlakeRegistry = false;
|
|
nixpkgs.flake.setNixPath = false;
|
|
|
|
# Do not modify after first flash.
|
|
system.stateVersion = "26.05";
|
|
}
|